IPBReklame: Unlock

Velkommen, gjest ( Logg på | Registrèr )

 
Reply to this topicStart new topic
> Iphone Problem - Probably A Simple Solution
alxx86
post 27.01.08 16:47
Innlegg #1



*

Gruppe: Medlem
Innlegg: 2
Ble med: 27.01.08
Medlem nr: 19 368



Hi
I realise there are a lot of people out there that have problems with their Iphones and would like to get some help, which I why I really appreciate anyone who takes time to read and hopefully help me out with my problem.

What I have:
Iphone bought in the UK on o2
04.02.13_g - I’m guessing version 1.1.2

What I’ve done so far:
Downgraded the firmware to 1.1.1 using a firmware file called

iPhone1,1_1.1.1_3A109a_Restore.ipsw

I’ve Jailbroken that firmware... works fine... except when I try to slot my
PREPAID o2 Sim card in I get a dot in the upper left corner and 4 smaller dots
after that. This stays there for a few minutes until the message 'No service'
appears. If I try to dial a number I will get a message saying 'Call Failed'.
The simcard I am using is a prepaid one which isn’t activated yet so I cannot
call out with it but I am supposed to activate it by calling '4444' so I guess I
should at least be able to dial that number. I haven’t got another phone
unlocked to o2 so I can’t try it to be sure but it shouldn’t be a problem.

When I slot the sim card which came with the phone into it, I get the same thing but
that’s expected as it’s not on contract or activated.
Is there a separate 1.1.1 firmware for the US and the UK? If there is, is that
what is causing my problem? Or can I only use an o2 sim on the 1.1.2 firmware?
That’s my first and main problem. The second is when I try to upgrade to 1.1.2 .
I follow all the instructions and I don’t have any issues on the way. When I get
to the stage where the phone is being jailbroken and it restarts by itself (or
some people tell you to reset it) ... it does... but it reboots with the lock
and I’m back to square one again.


The instructions I’m following are from
http://uk.youtube.com/watch?v=zDN_wA8ooYE&feature=related


I’ve tried to repeat the whole procedure twice but I get the same result. At the
moment my phone is 1.1.1 so that I can at least use the features... but still
not the phone.
As you can see I’m a bit of a noob but I still understand most of the technical
terms.

Please give me some advice if you can on what I should do.

Again... any help is very much appreciated.

Thanks

Alex

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
alxx86
post 27.01.08 18:15
Innlegg #2



*

Gruppe: Medlem
Innlegg: 2
Ble med: 27.01.08
Medlem nr: 19 368



third time lucky!! jailbreak now worked on 1.1.2.

But im still getting the NO SERVICE message!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
teslar
post 28.01.08 18:52
Innlegg #3



***

Gruppe: Fullverdig medlem
Innlegg: 13
Ble med: 27.11.07
Medlem nr: 18 852



QUOTE(alxx86 @ 27.01.08 19:15) *

third time lucky!! jailbreak now worked on 1.1.2.

But im still getting the NO SERVICE message!


Did you downgrade your basedband first before downgrading your firmware? 1.1.2 baseband cannot be unlocked.

i use an o2 sim card on a hacktivated phone but not unlocked, not sure if payg is different.

Also you shoud post in the English section, check the link at the top of the page
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
2 bruker(e) leser i dette emnet (2 gjester og 0 anonyme brukere)
0 brukere:

 



Lo-Fi versjon Dato og klokkeslett: 19.11.19 03:32
Unlock iPhone, Unlock iPhone 4 and iPhone 3GS unlocking | Unlock and Jailbreak iPad | Låse opp operatørlås og unlock | Bytte knust iPhone skjerm/glass? | Knust iPhone